BMW Archives - Why My Car?

How to fix streaking wipers on BMW 8 Series?

February 10, 2024 in BMW 8 Series

Fixing streaking wipers on a BMW 8 Series is crucial to maintaining good visibility during adverse weather conditions. When wipers do not make smooth contact with the windshield, it results in streaking.

Below we have highlighted ways to fix streaking wipers on a BMW 8 Series:

1. Examine Wiper Blades

Inspect the wiper blades for any signs of damage or wear in the rubber and replace them with new ones suitable for a BMW 8 Series.

2. Clean Wiper Blades

Streaking can be due to dirt, residue, or grime build-up on the wiper blades. Clean the wiper blades thoroughly with a cloth or a wet sponge.

3. Clean the Windshield

A windshield that is dirty or greasy can lead to streaking wipers. Use a good quality glass cleaner to clean the windshield thoroughly to eliminate any bugs, debris, dirt or grease.

4. Inspect Washer Fluid

Make sure the windshield washer fluid is topped up and maintained at optimum levels. Use a suitable quality washer fluid, preferably with a cleaning agent mixed inside, to keep wiper blades and windshields clean.

5. Tweak Wiper Arm Tension

Sometimes, incorrect tension in the wiper arms can cause streaking. Lift the wiper arms away from the windscreen and tweak the tension by gently bending the arms. Don’t apply too much force, or the wiper arms could get damaged.

6. Align Wiper Blades

Make sure the wiper blades are correctly aligned with the windshield. This will improve their effectiveness and performance.

7. Try a Windshield Treatment

Consider using a windshield treatment product to repel water and improve the usage of the wiper blades.

That’s how you can fix streaking wipers on a BMW 8 Series. You can enhance the performance of your BMW 8 Series’s windshield wipers and remove streaking issues if you follow the steps we have highlighted above. It is vital to do regular maintenance of the wiper blades and windshield. If streaking issues continue, then it is advised to consult with a professional mechanic for a more thorough diagnosis.

Disclaimer

The content provided on this page (How to fix streaking wipers on BMW 8 Series?) is intended solely for informational and entertainment purposes only. While we strive to offer accurate and up-to-date information, it’s important to note that the automotive industry is constantly evolving. Therefore, any advice, recommendations, or insights shared here should not be considered professional or definitive. Always consult with certified automotive experts and follow manufacturer guidelines when making decisions or performing maintenance on your vehicle. The author disclaims any responsibility for any actions taken based on the information provided, as individual circumstances may vary.

How to fix/replace flat battery on BMW i3?

February 10, 2024 in BMW i3

Fixing or replacing a flat battery on a BMW i3 is relatively straightforward. Below, we will highlight how to fix or replace a flat battery on a BMW i3.

1. Safety

Ensure the vehicle is in a safe area; the parking brake must be engaged, and the ignition switch and any electronic components, including lights and accessories, must be turned off.

2. Find the Battery

The battery can be generally in the trunk, below the floor or in the engine compartment. Remove the trunk floor panel for access for batteries fitted in the trunk compartment.

3. Examine the Battery

Check the battery for any visible damage, corrosion on the terminals, or signs of leakage. A leaking or damaged battery will need to be replaced.

4. Jump-Start the Vehicle

You can jump-start the BMW i3 if the battery is not entirely dead. You will need a pair of jump leads and a functioning vehicle for this. Connect the positive (+) and negative (-) terminals of the dead battery to the corresponding battery terminals of the functioning vehicle using the jump leads and then turn on the ignition of the functioning vehicle. After a few minutes, turn on the ignition of the BMW i3. If it starts successfully, drive the vehicle to charge the battery further.

5. Use a Battery Charger

Connect a battery charger to the dead battery based on manufacturer guidelines and allow the dead battery to charge for a few hours until it is charged to a sufficient level.

6. Replace the flat battery on the BMW i3

The battery must be replaced if it is damaged, too old or unable to hold a charge. To do this:

Carefully disconnect the negative terminal first, followed by the positive terminal
Hold down the clamps that hold the battery in place and lift out the old battery
Fit the new battery in its location and connect the terminals in reverse order, the positive terminal first and then the negative terminal
Secure the battery with the hold-down clamp

7. Reset Electronic Systems

Once the battery is replaced, some electronic systems in the vehicle may need reset. These can be the clock, radio presets, and some power windows. Please refer to the vehicle’s owner’s manual for instructions on resetting these vehicle systems. Professional assistance from a qualified mechanic may be required if you are uncertain about removing or replacing a battery.

That is how you replace a flat battery on a BMW i3. Please follow the vehicle manufacturer guidelines and vehicle specifications during any replacement works and ensure the correct battery is used for the correct car make and model.

Disclaimer

The content provided on this page (How to fix/replace flat battery on BMW i3?) is intended solely for informational and entertainment purposes only. While we strive to offer accurate and up-to-date information, it’s important to note that the automotive industry is constantly evolving. Therefore, any advice, recommendations, or insights shared here should not be considered professional or definitive. Always consult with certified automotive experts and follow manufacturer guidelines when making decisions or performing maintenance on your vehicle. The author disclaims any responsibility for any actions taken based on the information provided, as individual circumstances may vary.

How to fix streaking wipers on BMW i3?

February 10, 2024 in BMW i3

Fixing streaking wipers on a BMW i3 is crucial to maintaining good visibility during adverse weather conditions. When wipers do not make smooth contact with the windshield, it results in streaking.

Below we have highlighted ways to fix streaking wipers on a BMW i3:

1. Examine Wiper Blades

Inspect the wiper blades for any signs of damage or wear in the rubber and replace them with new ones suitable for a BMW i3.

2. Clean Wiper Blades

Streaking can be due to dirt, residue, or grime build-up on the wiper blades. Clean the wiper blades thoroughly with a cloth or a wet sponge.

3. Clean the Windshield

A windshield that is dirty or greasy can lead to streaking wipers. Use a good quality glass cleaner to clean the windshield thoroughly to eliminate any bugs, debris, dirt or grease.

4. Inspect Washer Fluid

Make sure the windshield washer fluid is topped up and maintained at optimum levels. Use a suitable quality washer fluid, preferably with a cleaning agent mixed inside, to keep wiper blades and windshields clean.

5. Tweak Wiper Arm Tension

Sometimes, incorrect tension in the wiper arms can cause streaking. Lift the wiper arms away from the windscreen and tweak the tension by gently bending the arms. Don’t apply too much force, or the wiper arms could get damaged.

6. Align Wiper Blades

Make sure the wiper blades are correctly aligned with the windshield. This will improve their effectiveness and performance.

7. Try a Windshield Treatment

Consider using a windshield treatment product to repel water and improve the usage of the wiper blades.

That’s how you can fix streaking wipers on a BMW i3. You can enhance the performance of your BMW i3’s windshield wipers and remove streaking issues if you follow the steps we have highlighted above. It is vital to do regular maintenance of the wiper blades and windshield. If streaking issues continue, then it is advised to consult with a professional mechanic for a more thorough diagnosis.

Disclaimer

The content provided on this page (How to fix streaking wipers on BMW i3?) is intended solely for informational and entertainment purposes only. While we strive to offer accurate and up-to-date information, it’s important to note that the automotive industry is constantly evolving. Therefore, any advice, recommendations, or insights shared here should not be considered professional or definitive. Always consult with certified automotive experts and follow manufacturer guidelines when making decisions or performing maintenance on your vehicle. The author disclaims any responsibility for any actions taken based on the information provided, as individual circumstances may vary.

How to fix/replace flat battery on BMW i8?

February 10, 2024 in BMW i8

Fixing or replacing a flat battery on a BMW i8 is relatively straightforward. Below, we will highlight how to fix or replace a flat battery on a BMW i8.

1. Safety

Ensure the vehicle is in a safe area; the parking brake must be engaged, and the ignition switch and any electronic components, including lights and accessories, must be turned off.

2. Find the Battery

The battery can be generally in the trunk, below the floor or in the engine compartment. Remove the trunk floor panel for access for batteries fitted in the trunk compartment.

3. Examine the Battery

Check the battery for any visible damage, corrosion on the terminals, or signs of leakage. A leaking or damaged battery will need to be replaced.

4. Jump-Start the Vehicle

You can jump-start the BMW i8 if the battery is not entirely dead. You will need a pair of jump leads and a functioning vehicle for this. Connect the positive (+) and negative (-) terminals of the dead battery to the corresponding battery terminals of the functioning vehicle using the jump leads and then turn on the ignition of the functioning vehicle. After a few minutes, turn on the ignition of the BMW i8. If it starts successfully, drive the vehicle to charge the battery further.

5. Use a Battery Charger

Connect a battery charger to the dead battery based on manufacturer guidelines and allow the dead battery to charge for a few hours until it is charged to a sufficient level.

6. Replace the flat battery on the BMW i8

The battery must be replaced if it is damaged, too old or unable to hold a charge. To do this:

Carefully disconnect the negative terminal first, followed by the positive terminal
Hold down the clamps that hold the battery in place and lift out the old battery
Fit the new battery in its location and connect the terminals in reverse order, the positive terminal first and then the negative terminal
Secure the battery with the hold-down clamp

7. Reset Electronic Systems

Once the battery is replaced, some electronic systems in the vehicle may need reset. These can be the clock, radio presets, and some power windows. Please refer to the vehicle’s owner’s manual for instructions on resetting these vehicle systems. Professional assistance from a qualified mechanic may be required if you are uncertain about removing or replacing a battery.

That is how you replace a flat battery on a BMW i8. Please follow the vehicle manufacturer guidelines and vehicle specifications during any replacement works and ensure the correct battery is used for the correct car make and model.

Disclaimer

The content provided on this page (How to fix/replace flat battery on BMW i8?) is intended solely for informational and entertainment purposes only. While we strive to offer accurate and up-to-date information, it’s important to note that the automotive industry is constantly evolving. Therefore, any advice, recommendations, or insights shared here should not be considered professional or definitive. Always consult with certified automotive experts and follow manufacturer guidelines when making decisions or performing maintenance on your vehicle. The author disclaims any responsibility for any actions taken based on the information provided, as individual circumstances may vary.

How to fix streaking wipers on BMW i8?

February 10, 2024 in BMW i8

Fixing streaking wipers on a BMW i8 is crucial to maintaining good visibility during adverse weather conditions. When wipers do not make smooth contact with the windshield, it results in streaking.

Below we have highlighted ways to fix streaking wipers on a BMW i8:

1. Examine Wiper Blades

Inspect the wiper blades for any signs of damage or wear in the rubber and replace them with new ones suitable for a BMW i8.

2. Clean Wiper Blades

Streaking can be due to dirt, residue, or grime build-up on the wiper blades. Clean the wiper blades thoroughly with a cloth or a wet sponge.

3. Clean the Windshield

A windshield that is dirty or greasy can lead to streaking wipers. Use a good quality glass cleaner to clean the windshield thoroughly to eliminate any bugs, debris, dirt or grease.

4. Inspect Washer Fluid

Make sure the windshield washer fluid is topped up and maintained at optimum levels. Use a suitable quality washer fluid, preferably with a cleaning agent mixed inside, to keep wiper blades and windshields clean.

5. Tweak Wiper Arm Tension

Sometimes, incorrect tension in the wiper arms can cause streaking. Lift the wiper arms away from the windscreen and tweak the tension by gently bending the arms. Don’t apply too much force, or the wiper arms could get damaged.

6. Align Wiper Blades

Make sure the wiper blades are correctly aligned with the windshield. This will improve their effectiveness and performance.

7. Try a Windshield Treatment

Consider using a windshield treatment product to repel water and improve the usage of the wiper blades.

That’s how you can fix streaking wipers on a BMW i8. You can enhance the performance of your BMW i8’s windshield wipers and remove streaking issues if you follow the steps we have highlighted above. It is vital to do regular maintenance of the wiper blades and windshield. If streaking issues continue, then it is advised to consult with a professional mechanic for a more thorough diagnosis.

Disclaimer

The content provided on this page (How to fix streaking wipers on BMW i8?) is intended solely for informational and entertainment purposes only. While we strive to offer accurate and up-to-date information, it’s important to note that the automotive industry is constantly evolving. Therefore, any advice, recommendations, or insights shared here should not be considered professional or definitive. Always consult with certified automotive experts and follow manufacturer guidelines when making decisions or performing maintenance on your vehicle. The author disclaims any responsibility for any actions taken based on the information provided, as individual circumstances may vary.

How to fix/replace flat battery on BMW M2?

February 10, 2024 in BMW M2

Fixing or replacing a flat battery on a BMW M2 is relatively straightforward. Below, we will highlight how to fix or replace a flat battery on a BMW M2.

1. Safety

Ensure the vehicle is in a safe area; the parking brake must be engaged, and the ignition switch and any electronic components, including lights and accessories, must be turned off.

2. Find the Battery

The battery can be generally in the trunk, below the floor or in the engine compartment. Remove the trunk floor panel for access for batteries fitted in the trunk compartment.

3. Examine the Battery

Check the battery for any visible damage, corrosion on the terminals, or signs of leakage. A leaking or damaged battery will need to be replaced.

4. Jump-Start the Vehicle

You can jump-start the BMW M2 if the battery is not entirely dead. You will need a pair of jump leads and a functioning vehicle for this. Connect the positive (+) and negative (-) terminals of the dead battery to the corresponding battery terminals of the functioning vehicle using the jump leads and then turn on the ignition of the functioning vehicle. After a few minutes, turn on the ignition of the BMW M2. If it starts successfully, drive the vehicle to charge the battery further.

5. Use a Battery Charger

Connect a battery charger to the dead battery based on manufacturer guidelines and allow the dead battery to charge for a few hours until it is charged to a sufficient level.

6. Replace the flat battery on the BMW M2

The battery must be replaced if it is damaged, too old or unable to hold a charge. To do this:

Carefully disconnect the negative terminal first, followed by the positive terminal
Hold down the clamps that hold the battery in place and lift out the old battery
Fit the new battery in its location and connect the terminals in reverse order, the positive terminal first and then the negative terminal
Secure the battery with the hold-down clamp

7. Reset Electronic Systems

Once the battery is replaced, some electronic systems in the vehicle may need reset. These can be the clock, radio presets, and some power windows. Please refer to the vehicle’s owner’s manual for instructions on resetting these vehicle systems. Professional assistance from a qualified mechanic may be required if you are uncertain about removing or replacing a battery.

That is how you replace a flat battery on a BMW M2. Please follow the vehicle manufacturer guidelines and vehicle specifications during any replacement works and ensure the correct battery is used for the correct car make and model.

Disclaimer

The content provided on this page (How to fix/replace flat battery on BMW M2?) is intended solely for informational and entertainment purposes only. While we strive to offer accurate and up-to-date information, it’s important to note that the automotive industry is constantly evolving. Therefore, any advice, recommendations, or insights shared here should not be considered professional or definitive. Always consult with certified automotive experts and follow manufacturer guidelines when making decisions or performing maintenance on your vehicle. The author disclaims any responsibility for any actions taken based on the information provided, as individual circumstances may vary.

How to fix streaking wipers on BMW M2?

February 10, 2024 in BMW M2

Fixing streaking wipers on a BMW M2 is crucial to maintaining good visibility during adverse weather conditions. When wipers do not make smooth contact with the windshield, it results in streaking.

Below we have highlighted ways to fix streaking wipers on a BMW M2:

1. Examine Wiper Blades

Inspect the wiper blades for any signs of damage or wear in the rubber and replace them with new ones suitable for a BMW M2.

2. Clean Wiper Blades

Streaking can be due to dirt, residue, or grime build-up on the wiper blades. Clean the wiper blades thoroughly with a cloth or a wet sponge.

3. Clean the Windshield

A windshield that is dirty or greasy can lead to streaking wipers. Use a good quality glass cleaner to clean the windshield thoroughly to eliminate any bugs, debris, dirt or grease.

4. Inspect Washer Fluid

Make sure the windshield washer fluid is topped up and maintained at optimum levels. Use a suitable quality washer fluid, preferably with a cleaning agent mixed inside, to keep wiper blades and windshields clean.

5. Tweak Wiper Arm Tension

Sometimes, incorrect tension in the wiper arms can cause streaking. Lift the wiper arms away from the windscreen and tweak the tension by gently bending the arms. Don’t apply too much force, or the wiper arms could get damaged.

6. Align Wiper Blades

Make sure the wiper blades are correctly aligned with the windshield. This will improve their effectiveness and performance.

7. Try a Windshield Treatment

Consider using a windshield treatment product to repel water and improve the usage of the wiper blades.

That’s how you can fix streaking wipers on a BMW M2. You can enhance the performance of your BMW M2’s windshield wipers and remove streaking issues if you follow the steps we have highlighted above. It is vital to do regular maintenance of the wiper blades and windshield. If streaking issues continue, then it is advised to consult with a professional mechanic for a more thorough diagnosis.

Disclaimer

The content provided on this page (How to fix streaking wipers on BMW M2?) is intended solely for informational and entertainment purposes only. While we strive to offer accurate and up-to-date information, it’s important to note that the automotive industry is constantly evolving. Therefore, any advice, recommendations, or insights shared here should not be considered professional or definitive. Always consult with certified automotive experts and follow manufacturer guidelines when making decisions or performing maintenance on your vehicle. The author disclaims any responsibility for any actions taken based on the information provided, as individual circumstances may vary.

How to fix/replace flat battery on BMW X4?

February 10, 2024 in BMW X4

Fixing or replacing a flat battery on a BMW X4 is relatively straightforward. Below, we will highlight how to fix or replace a flat battery on a BMW X4.

1. Safety

Ensure the vehicle is in a safe area; the parking brake must be engaged, and the ignition switch and any electronic components, including lights and accessories, must be turned off.

2. Find the Battery

The battery can be generally in the trunk, below the floor or in the engine compartment. Remove the trunk floor panel for access for batteries fitted in the trunk compartment.

3. Examine the Battery

Check the battery for any visible damage, corrosion on the terminals, or signs of leakage. A leaking or damaged battery will need to be replaced.

4. Jump-Start the Vehicle

You can jump-start the BMW X4 if the battery is not entirely dead. You will need a pair of jump leads and a functioning vehicle for this. Connect the positive (+) and negative (-) terminals of the dead battery to the corresponding battery terminals of the functioning vehicle using the jump leads and then turn on the ignition of the functioning vehicle. After a few minutes, turn on the ignition of the BMW X4. If it starts successfully, drive the vehicle to charge the battery further.

5. Use a Battery Charger

Connect a battery charger to the dead battery based on manufacturer guidelines and allow the dead battery to charge for a few hours until it is charged to a sufficient level.

6. Replace the flat battery on the BMW X4

The battery must be replaced if it is damaged, too old or unable to hold a charge. To do this:

Carefully disconnect the negative terminal first, followed by the positive terminal
Hold down the clamps that hold the battery in place and lift out the old battery
Fit the new battery in its location and connect the terminals in reverse order, the positive terminal first and then the negative terminal
Secure the battery with the hold-down clamp

7. Reset Electronic Systems

Once the battery is replaced, some electronic systems in the vehicle may need reset. These can be the clock, radio presets, and some power windows. Please refer to the vehicle’s owner’s manual for instructions on resetting these vehicle systems. Professional assistance from a qualified mechanic may be required if you are uncertain about removing or replacing a battery.

That is how you replace a flat battery on a BMW X4. Please follow the vehicle manufacturer guidelines and vehicle specifications during any replacement works and ensure the correct battery is used for the correct car make and model.

Disclaimer

The content provided on this page (How to fix/replace flat battery on BMW X4?) is intended solely for informational and entertainment purposes only. While we strive to offer accurate and up-to-date information, it’s important to note that the automotive industry is constantly evolving. Therefore, any advice, recommendations, or insights shared here should not be considered professional or definitive. Always consult with certified automotive experts and follow manufacturer guidelines when making decisions or performing maintenance on your vehicle. The author disclaims any responsibility for any actions taken based on the information provided, as individual circumstances may vary.

How to fix streaking wipers on BMW X4?

February 10, 2024 in BMW X4

Fixing streaking wipers on a BMW X4 is crucial to maintaining good visibility during adverse weather conditions. When wipers do not make smooth contact with the windshield, it results in streaking.

Below we have highlighted ways to fix streaking wipers on a BMW X4:

1. Examine Wiper Blades

Inspect the wiper blades for any signs of damage or wear in the rubber and replace them with new ones suitable for a BMW X4.

2. Clean Wiper Blades

Streaking can be due to dirt, residue, or grime build-up on the wiper blades. Clean the wiper blades thoroughly with a cloth or a wet sponge.

3. Clean the Windshield

A windshield that is dirty or greasy can lead to streaking wipers. Use a good quality glass cleaner to clean the windshield thoroughly to eliminate any bugs, debris, dirt or grease.

4. Inspect Washer Fluid

Make sure the windshield washer fluid is topped up and maintained at optimum levels. Use a suitable quality washer fluid, preferably with a cleaning agent mixed inside, to keep wiper blades and windshields clean.

5. Tweak Wiper Arm Tension

Sometimes, incorrect tension in the wiper arms can cause streaking. Lift the wiper arms away from the windscreen and tweak the tension by gently bending the arms. Don’t apply too much force, or the wiper arms could get damaged.

6. Align Wiper Blades

Make sure the wiper blades are correctly aligned with the windshield. This will improve their effectiveness and performance.

7. Try a Windshield Treatment

Consider using a windshield treatment product to repel water and improve the usage of the wiper blades.

That’s how you can fix streaking wipers on a BMW X4. You can enhance the performance of your BMW X4’s windshield wipers and remove streaking issues if you follow the steps we have highlighted above. It is vital to do regular maintenance of the wiper blades and windshield. If streaking issues continue, then it is advised to consult with a professional mechanic for a more thorough diagnosis.

Disclaimer

The content provided on this page (How to fix streaking wipers on BMW X4?) is intended solely for informational and entertainment purposes only. While we strive to offer accurate and up-to-date information, it’s important to note that the automotive industry is constantly evolving. Therefore, any advice, recommendations, or insights shared here should not be considered professional or definitive. Always consult with certified automotive experts and follow manufacturer guidelines when making decisions or performing maintenance on your vehicle. The author disclaims any responsibility for any actions taken based on the information provided, as individual circumstances may vary.

How to fix/replace flat battery on BMW 3 Series?

February 10, 2024 in BMW 3 Series

Fixing or replacing a flat battery on a BMW 3 Series is relatively straightforward. Below, we will highlight how to fix or replace a flat battery on a BMW 3 Series.

1. Safety

Ensure the vehicle is in a safe area; the parking brake must be engaged, and the ignition switch and any electronic components, including lights and accessories, must be turned off.

2. Find the Battery

The battery can be generally in the trunk, below the floor or in the engine compartment. Remove the trunk floor panel for access for batteries fitted in the trunk compartment.

3. Examine the Battery

Check the battery for any visible damage, corrosion on the terminals, or signs of leakage. A leaking or damaged battery will need to be replaced.

4. Jump-Start the Vehicle

You can jump-start the BMW 3 Series if the battery is not entirely dead. You will need a pair of jump leads and a functioning vehicle for this. Connect the positive (+) and negative (-) terminals of the dead battery to the corresponding battery terminals of the functioning vehicle using the jump leads and then turn on the ignition of the functioning vehicle. After a few minutes, turn on the ignition of the BMW 3 Series. If it starts successfully, drive the vehicle to charge the battery further.

5. Use a Battery Charger

Connect a battery charger to the dead battery based on manufacturer guidelines and allow the dead battery to charge for a few hours until it is charged to a sufficient level.

6. Replace the flat battery on the BMW 3 Series

The battery must be replaced if it is damaged, too old or unable to hold a charge. To do this:

Carefully disconnect the negative terminal first, followed by the positive terminal
Hold down the clamps that hold the battery in place and lift out the old battery
Fit the new battery in its location and connect the terminals in reverse order, the positive terminal first and then the negative terminal
Secure the battery with the hold-down clamp

7. Reset Electronic Systems

Once the battery is replaced, some electronic systems in the vehicle may need reset. These can be the clock, radio presets, and some power windows. Please refer to the vehicle’s owner’s manual for instructions on resetting these vehicle systems. Professional assistance from a qualified mechanic may be required if you are uncertain about removing or replacing a battery.

That is how you replace a flat battery on a BMW 3 Series. Please follow the vehicle manufacturer guidelines and vehicle specifications during any replacement works and ensure the correct battery is used for the correct car make and model.

Disclaimer

The content provided on this page (How to fix/replace flat battery on BMW 3 Series?) is intended solely for informational and entertainment purposes only. While we strive to offer accurate and up-to-date information, it’s important to note that the automotive industry is constantly evolving. Therefore, any advice, recommendations, or insights shared here should not be considered professional or definitive. Always consult with certified automotive experts and follow manufacturer guidelines when making decisions or performing maintenance on your vehicle. The author disclaims any responsibility for any actions taken based on the information provided, as individual circumstances may vary.